![FireBird Envirogreen Combi HE Technical Manual Download Page 19](http://html1.mh-extra.com/html/firebird/envirogreen-combi-he/envirogreen-combi-he_technical-manual_2291243019.webp)
3
Condensate Plume disPersal
When choosing the location for a condensing boiler, special consideration must be given to the positioning of the flue terminal.
Care should be taken to locate it so as to prevent either the end user or their neighbours perceiving the plume to be a nuisance.
It should be noted that the normal statutory clearances required around low level flue terminals may not be sufficient to cope
with plume dispersal from a condensing boiler.
3
17
3.2 CoMBi He & CoMBiPaC He - installeR guiDelines
90˚ terminal should be tilted up
to prevent condensate droping
from end of flue
For right hand flue option, remove the
two screws securing the flue, rotate the flue
and swap the removable side panels
Put the 90˚ flue terminal
with the cone on the boiler.
Fix the guard plate to the boiler and
then the guard to the boiler.
Boiler after
installation.
Fig. 1
Fig. 2
Fig. 3
installation instruCtions are suPPlied WitH all Flue Kits
CoMBiPaC He Flue installation