7
HOW TO INSTALL YOUR
SMOKE ALARM
IMPORTANT:
Make sure you have read
and understood this manual before
installing your smoke alarm .
1 Preparation
The base plate should be attached to the
ceiling or wall .
Break out the tabs from the base plate .
Use the fixing slots on the base plate as
a guide when marking the position of the
drill holes . With an appropriately sized
drill, drill the holes and insert the plastic
fixing anchors supplied (if needed) .
Base plate tabs
2 Install Base Plate
Fit the base plate to the ceiling or wall
using the screws provided .
3 Fit Your FireAngel Smoke Alarm
The alarm has a mechanism on the
back that activates the alarm when it is
correctly connected to the base plate .
There are three lugs (hooks) on the back
of the alarm that slide in to three slots on
the base plate .
Alarm
Base Plate
Lugs (hooks)
When used with the base plate, the alarm
can be attached in any orientation, simply
line up the lugs (hooks) with the holes at
the end of the slots then twist the alarm
clockwise until the alarm stops, make sure
the alarm is twisted on fully .