FireAngel Thermoptek ST-622 User Manual Download Page 11

11

Your alarm will automatically return 

to full sensitivity on completion of the 
reset cycle and the red LED will revert to 
flashing once every 40 seconds .

DANGER: 

Never ignore any alarm . 

Ignoring the alarm may result in injury or 
death . If your smoke alarm activates and 
alarms and you are not absolutely certain 
of the source of the smoke, get everyone 
out of the house immediately .

LOW BATTERY 

WARNING SILENCE

Low battery warnings often start at night 
or when it maybe inconvenient to replace 
your alarm .  You can silence the audible 
chirp for a period of 8 hours by pressing 
the test button .  Your smoke alarm will 

still detect smoke during this time of low 
battery warning silence .  However it is 
recommended that you replace your alarm 
immediately, and certainly within 7 days, 
as your alarm may then have insufficient 
power to warn you of a real fire situation 
after this time .

WARNING:

  Your smoke alarm cannot be 

silenced if the chirp is indicating a fault .  In 
this instance, the unit should be replaced 
immediately to ensure protection in the 
event of a fire .

MAINTENANCE

Your smoke alarm has been designed to be 
as maintenance-free as possible, however 
there are several things you must do to 
keep it working properly .

CAUTION: 

Your smoke alarm is a sealed 

electrical device and no attempt should be 
made to open the case . Attempting to open 
the case will invalidate your Warranty .

Testing

Test your smoke alarm once every week 
see ‘Alarm Test’ . Any test failures should be 
reported to the Technical Support Team .

Cleaning

As a minimum your smoke alarm should 
be cleaned once every 3 months using 
your vacuum cleaner fitted with the soft 
brush attachment .

WARNING:

 Your smoke alarm may false 

alarm when it is being cleaned using a 
vacuum cleaner .

IMPORTANT:

 Do not use solvents or 

cleaners on your smoke alarm, as they 
may cause damage to the sensor or 
circuitry . The unit can be wiped with a 
slightly damp cloth .

CAUTION:

 Do not paint the smoke alarm 

as this may block the openings and prevent 
smoke from entering the sensor .

Summary of Contents for Thermoptek ST-622

















Reviews: