4
INTRODUCTION
Do not
:
• Expose this alarm to moisture, dripping,
splashing, steam or condensation.
• Paint the alarm.
• Install heat alarms in escape routes
instead of smoke alarms.
• Test your alarm with a naked flame.
The test button tests the alarm’s full
functionality.
• Ignore any alarm in the network if
it is sounding, it is warning you of a
potentially hazardous situation.
Make sure you
:
• Leave this guide with the end user.
• Connect the alarm as late as possible
in an installation, particularly in new
builds, to avoid contamination.
• Remove the dust cover before applying
power.
• Ensure that after any building work
or after repositioning large items of
furniture (beds, sofas, shelving units
etc.), you carry out an alarm test on all
alarms to ensure they are still working.
• Test your alarm weekly as well as testing
any other interconnected alarms.
• Make sure your alarm is situated in one
of the recommended locations only.
Smoke Alarm ST-230 / WST-230
Heat Alarm HT-230 / WHT-230
Please read this guide in full before using your alarm!
This user guide covers a number of different models. Some of the illustrations will look
different to your particular model.
