16
Push the screwdriver in and the alarm
should fall free from the base plate. Please
be aware that the alarm will fall as soon as
pressure is applied to the screwdriver, be
prepared to catch it.
DISPOSAL
Waste electrical products should not be disposed
of with your other household waste. The alarm is
ideally suited for disposal within the waste electronic
and electrical equipment (WEEE) recycling scheme.
Please recycle where facilities exist. Check with your
local authority, retailer or contact Technical Support
for recycling/disposal advice as regional variations
apply. Your alarm can be unlearned from a network,
as described in ‘Troubleshooting’. Once it is removed
from its base plate it is automatically disabled and
ready to be disposed of.
WARNING:
Do not burn or dispose of in fire.
WARNING:
If your alarm is dropped or damaged, as
a precaution, it should be removed from the building.
WARRANTY
FireAngel Safety Technology Limited warrants to the
original purchaser that its enclosed alarm be free
from defects in materials and workmanship under
normal residential use and service for a period of 5
years for the WST-230/WHT-230 and 2 years for the
ST-230/HT-230 - from the date of purchase. Provided
the product is sent back to FireAngel Safety
Technology Limited with proof and date of purchase,
FireAngel Safety Technology Limited hereby warrants
that during the warranty period (5 years for the
WST-230/WHT-230 and 2 years for the ST-230/HT-230)
commencing from the date of purchase, FireAngel
Safety Technology Limited, at its discretion, agrees to
replace the unit free of charge.
The warranty on any replacement ST-230/WST-230/
HT-230/WHT-230 alarm, will last for the remainder of
the period of the original warranty in respect of the
alarm originally purchased – that is from the date of
MAINTENANCE
Your alarms should be cleaned every 3
months, by firstly turning off the mains
electricity supply and then using a
vacuum cleaner fitted with the soft brush
attachment. Switch the power back on
once you have finished.
If you need to remove your alarm from it’s
base plate, turn off the mains electricity
supply, use a small screwdriver and insert
into the hole at the base of the alarm.
Insert screwdriver here
