background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 YEAR LIMITED WARRANTY – Customers in the Continental US 

All components are warranted for a period of 1 year after date of purchase by the original owner against defects in 
materials and workmanship under normal use. This warranty does NOT cover normal wear and weathering, assembly 
and/or maintenance OR use in a commercial application. At Well Traveled Living’s sole discretion, products under 
warranty will be repaired and/or replaced at no charge to the customer. Any returns sent back to Well Traveled Living 
must be sent via prepaid freight and in the original retail packaging.  

 

For warranty service contact Well Traveled Living at the address, phone numbers or internet site and email listed in this 
owner’s manual. Be sure to have your sales receipt, date of purchase and catalogue/model numbers available when 
calling. All warranty service will be coordinated by the Well Traveled Living’s, Amelia Island, Florida service center. 

 

This warranty is extended only to the original purchaser. Proof of purchase will be required before warranty service is 
rendered. The sales receipt is the only valid proof of purchase. This warranty only covers failures due to defects in 
materials or workmanship which occur during normal use. Failures and/or damage which result from accident, negligence, 
misuse, abuse, neglect, mishandling, alteration or modification, failure to maintain, improper assembly or maintenance, 
service by unauthorized agency or use of unauthorized components or damage that is attributable to acts of God are NOT 
covered. 
 

***THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED ABOVE*** 

 

***PURCHASER ASSUMES ALL RISKS IN THE ASSEMBLY AND OPERATION OF THIS UNIT*** 

 

***FAILURE TO FOLLOW WARNINGS AND OPERATIONAL INSTRUCTIONS CONTAINED IN THIS MANUAL CAN 

RESULT IN SEVERE PROPERTY DAMAGE AND/OR PERSONAL INJURY*** 

 

IN NO EVENT WILL WELL TRAVELED LIVING, OR ITS DIRECTORS, OFFICERS OR AGENTS BE LIABLE TO THE 
PURCHASER OR ANY THIRD PARTY, WHETHER IN CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR ANY 
INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR DAMAGE 
ARISING OUT OF OR IN CONNECTION WITH THE SALE, MAINTENANCE, USE, OR INABILITY TO USE THE 
PRODUCT, EVEN IF WELL TRAVELED LIVING OR ITS DIRECTORS, OFFICERS OR AGENTS HAVE BEEN 
ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS, OR 
DAMAGES ARE FORESEEABLE. IN NO EVENT WILL WELL TRAVELED LIVING, OR ITS OFFICERS, DIRECTORS, 
OR AGENTS BE LIABLE FOR ANY DIRECT LOSSES, COSTS OR DAMAGES THAT EXCEED THE PURCHASE 
PRICE OF THE PRODUCT. 
 
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO THE PURCHASER. 
 

This limited warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to 
jurisdiction. The provisions of the United Nations Convention on Contracts for the Sales of Goods shall not apply to this 
limited warranty or the sale of products covered by this limited warranty.  

Distributed

 

By:

 

Well

 

Traveled

 

Living

 

716

 

S

 

8

th

 

Street

 

Amelia

 

Island,

 

FL

 

32034

 

Toll

 

Free:

 

866

WTL

SUPP

 

 

Web:

 

www.wtliving.com

 

Email:

 

[email protected]

 

***IMPORTANT

 

NOTICE***

 

Do

 

NOT

 

r

eturn

 

to

 

place

 

of

 

purchase

‐ 

For

 

customer

 

service

 

and

 

warranty

 

issues

 

contact

 

our

 

Customer

 

Service

 

Center

 

at:

 

(866)

985

7877

 

OR

 

Email:

 

[email protected]

 

Customer

 

Service

 

Hours:

 

Mon.

 

 

Fri.

 

9:00

 

a.m.

 

 

6:00

 

p.m.

 

(EST)

 

 

Fire

 

Sense®,

 

Mojave

 

Sun

 

™,

  

and

 

Well

 

Traveled

 

Living®

 

are

 

registered

 

trademarks

 

of

 

Well

 

Traveled

 

Imports,

 

Inc®.

  

All

 

assembly

 

instruction

 

presentations

 

are

 

the

 

property

 

of

 

Well

 

Traveled

 

Imports,

 

Inc.®

 

and

 

are

 

protected

 

by

 

U.S.

 

copyrights

 

and

 

trademarks.

  

All

 

rights

 

reserved.

 

Summary of Contents for PH08-SA






















Reviews: