Version: August 2020
23
How to lay Beach Driftwood Firebed
– GD8 1400 & 1600
•
Lay logs first, in these positions.
•
Lay rocks next, in these positions.
•
Switch the appliance ON at
‘HIGH’ setting to check how flame looks. The flame will take 10-20 seconds to
light fully.
•
IMPORTANT:
the flame effect should look natural and non-uniform, running the entire length of the burner.
•
Common flame effect issues are:
•
Flame touching edge of burner tray.
•
Missing flames along length of burner.
•
Both these issues can be resolved by switching the appliance OFF and slightly repositioning rocks and logs
at the problem areas.
•
Repeat this switching On/Off and repositioning until a natural and non-uniform flame effect is achieved.
•
Once a natural and non-uniform flame effect is achieved, switch the appliance to
‘LOW’ setting and ensure
the flame effect, although smaller, still looks good.
•
Switch the appliance OFF.
