Version: June 2019
15
How to lay the Firebed
– GD60 1600
• Switch the appliance on at ‘HIGH’ setting to check how flame looks. The flame will take 10-20 seconds to
light fully.
•
IMPORTANT: T
he flame effect should look natural and non-uniform, running the entire length of the burner.
• Common flame effect issues are:
o
Flame burning under logs
.
o Missing flames along length of burner.
• Both these issues can be resolved by switching the appliance off and slightly repositioning the firebed at the
problem areas.
• Repeat this switching on/off and repositioning until a natural and non-uniform flame effect is achieved.
• Once a natural and non-uniform flame effect is achieved, switch the appliance to ‘LOW’ setting and ensure
the flame effect, although smaller, still looks good.
• Switch the appliance off.