I N S T A L L A T I O N
19.
40. When mounting the Remote Head using the brackets, first plug in and thread the cable
through the bracket assembly as shown in (Figure. 21).
41. Plug the CA Cable into the Remote Head and secure the panel with (4) machine screws
and nuts to the front of the bracket.
42. Using the supplied cable ties secure the CA Cable to the bracket anchors as shown in
(Figure 22).
45. Mount the bracket and adjust the panel to a desirable viewing angle with the two hand knobs.
43. Before installing the bracket to the mounting surface, drill a 3/4" hole at the wire location.
Snap the grommet into the bracket as shown in (Figure 22) and then use the bracket as a
template to mark the mounting holes.
44. Drill (4) mounting holes at 7/64" for #6 sheet metal screws or 9/64" for #6 machine screws.
Grommet
Hand Knob
Cable Ties
FIGURE 22:
FIGURE 21:
Remote Bracket
Hand Knob
