6
5. Mount the forced draft blower with 3 ¼-20 x 3/4 inch bolts (provided).
6. Attach Fan limit with 3 #10 screws in pre-drilled holes.
7. Mount the electrical control center with 4 #10 screws (provided).
DETAIL B
SCALE 1
B
Fan Limit thermostat
To install, remove thermostat
cover, attached with three #10
sheet metal screws and replace
thermostat cover
ATTACH THE TWO WALL
THERMOSTAT WIRES TO
THE TERMINALS SHOWN
THERMOSTAT TERMINALS
Fan Limit Control:
To install, remove cover, attach with
three #10 sheet metal screws and
replace cover.
THERMOSTAT TERMINALS
Attach the two wall thermostat wires
to the terminals shown
1/4-20 Screw
1/4 - 20 Bolt
