13
FIPALIFT Smart
Use
Operating handle
1.
Operating handle in outer position:
- The lifting unit is in its highest position with load.
- Without the lifting unit is moved into its preset neutral position.
2.
Operating handle in half-pressed position:
- The load is raised or lowered according to pressure on the lever.
3.
Operating handle in fully pressed position:
- With load, the lifting unit is lowered rapidly and the load is released once it has reached a solid base.
- Without load, the lifting unit is lowered rapidly.
Gripping the load from above
Push the operating handle in fully and place the vacuum
cup on the load to be lifted. Release the lever fully or
partially to raise the load.
Gripping the load from the side
>
Rotate the vacuum cup forwards if the load is to be held
from the side.
>
Do not lift the load with surfaces that have loose areas.
These area can come loose, get sucked into the vacuum
cup and the load could then fall!
>
Only lift loads that are so stable that they cannot come
apart when lifted.
Grip the load from the side when the upper side does not have a suitable gripping surface.
