14
MIN MODE (icon reports MIN)
WINDOW MODE (icon reports WDW)
MAX MODE (icon reports MAX)
PULSE MODE (icon reports PLS)
Flow
Time
Hysteresis
Output relaxed
Output energized
Setpoint
Flow
Time
Setpoint
Hysteresis
Hysteresis
Output relaxed
Output energized
Setpoint
Flow
Time
Hysteresis
Output relaxed
Output energized
Setpoint
Pulse duration
Volume
Volume
Volume
Pulse duration
Pulse duration
Output relaxed
Output energized
FLOW
OUTPUT FOR F3.00.W
In case of combination with F3.00.W, LOW BATTERY status and NO SIGNAL
condition can be remoted by two different digital outputs or by one for both
indications.
SOFTWARE UPDATING
In order to update the Instrument Software with a New Firmware Release
follow the suggested procedures:
TO UPDATE INSTALLED UNITS
- Download the interface software “FLS Calibration System”
and the Updated Software on www.flsnet.it
- Launch the software "FLS Calibration System" on the laptop
- Select OPTION and then UPGRADE FIRMWARE
- Confirm the "Firmware Upgrade" procedure by ENTER
MAX MODE (icon reports MAX)
pH
Time
Hysteresis
Output relaxed
Output energized
Setpoint
