15
ORDERING DATA
Part
No.
Description /
Name
Power
supply
Wire power
Technology
Sensor
Input
Output
M9.08.P1
Panel mount
pH/ORP & Flow
monitor & transmitter
12 - 24 VDC
3/4 wire
pH/ORP,
Temperature,
Flow (Frequency)
2*(4-20mA),
2*(S.S.R.),
2*(mech. relay)
M9.08.W1
Wall mount
pH/ORP & Flow
monitor & transmitter
12 - 24 VDC
3/4 wire
pH/ORP,
Temperature,
Flow (Frequency)
2*(4-20mA),
2*(S.S.R.),
2*(mech. relay)
M9.08.W2
Wall mount
pH/ORP & Flow
monitor & transmitter
110 - 230
VAC
3/4 wire
pH/ORP,
Temperature,
Flow (Frequency)
2*(4-20mA),
2*(S.S.R.),
2*(mech. relay)
ACCESSORIES
SPARE PARTS
Part No.
Name
Description
M9.KW1
Wall mounting kit
144x144mm plastic box for wall installation
of all panel mount monitors
M9.KW2
Wall mounting kit with
power supply
144x144mm plastic box and 110/230 VAC to 24 VDC power
supply for wall installation of all panel mount monitors
M9.KUSB
USB cable for device
interfacing
USB cable dedicated to FLS products, 1,5 meter long
Part No.
Name
Description
M9.SN1
Fixing snails
2 fixing snails for panel installation of FLS monitors
- Connect M9.08 to the laptop by the USB cable
- Select the item (M9.08) which appears on the navigation area
on the "FLS Calibration System" software
- Confirm FW UPGRADE and select the Updated Software
NOTE: At the end of the procedure restart the instruments in order to refresh
M9.08 software (It takes 90 seconds to refresh the SW. Please do not interrupt
the restarting process).
TO UPDATE NEW UNITS
- Download the interface software “FLS Calibration System” and the updated
software on www.flsnet.it.
- Launch the software "FLS Calibration System" on the laptop
- Push together ENTER and ESC powering the monitor
- Connect M9.08 to the laptop by the USB cable
- Select the item (M9.08) which appears on the surfing area on the software
"FLS Calibration System"
- Confirm FW UPGRADE and select the Updated Software
NOTE: At the end of the procedure restart the instruments in order to refresh
M9.08 software (It takes 90 seconds to refresh the SW.
Please do not interrupt the restarting process).
