Fiori DB 460, Use And Maintenance Manual

Page: 67 / 252

67
4
OPERATION AND USE
id.: DB 460 REV. 00 02/01/2015
12 - Red warning light: indicates that the hydraulic oil level is low.
13 - Red warning light: indicates the preheating phase of the engine spark plugs.
14 - Green warning light: indicates that the position lights or low beams are on.
15 - Green warning light: indicates that the direction indicators are on.
16 - Illuminated tortoise: indicates that low gear is engaged.
17 - Display: displays the hours of operation, fuel level, engine rpm and litre counter.
4.2.2.b Water liter counter (fi g. 5)
The three digits at the top of the display ( 17 ) indicate the total litres of water in the tank.
The litre counter can be reset by pressing and holding down the reset button E for at least 3 seconds with the
ignition key turned to the fi rst click (on position) or with the engine on.
4.2.2.c Hour counter/revolution counter (fi g. 5)
When turning on with the ignition key in position 1 (vehicle power), the instrument panel runs a brief test turning
on all the segments of the display after which the instrument panel warning lights will show the vehicle status.
Subsequently, at the bottom of the numerical display (
18 ), the hours remaining until the next service is due
are shown for 5 seconds. These are immediately followed by the actual total hours of vehicle operation, again
shown for 5 seconds, after which the engine rpm are shown.
The operating hour counter (
18 ) cannot be reset. The hours of operation are totalled correctly only if the engine
is running at a speed of more than 200 rpm. Counting does not depend on the number of engine revolutions,
but only on the time that has actually elapsed.
5
1
18
17 E
Note: if the FIORI BATCH CONTROLLER is installed on the machine, all functions of the litre
counter located on the electronic dashboard are not active, as the functions are displayed on the
operating panel.