Fiori DB 460, Use And Maintenance Manual

Page: 211 / 252

SEBU8325-01 43
Maintenance Section
Refill Capacities
Table 16
Perkins Specification for Distillate Diesel Fuel
(1)
Property UNITS Requirements “ASTM”Test “ISO”Test
Aromatics %Volume 35% maximum D1319 “ISO”3837
Ash %Weight 0.01% maximum D482 “ISO”6245
Carbon Residue on
10% Bottoms %Weight 0.35% maximum D524 “ISO”4262
Cetane Number
(2)
-
40 minimum D613/D6890 “ISO”5165
Cloud Point °C The cloud point must
not exceed the lowest
expected ambient
temperature. D2500 “ISO”3015
Copper Strip
Corrosion
-
No. 3 maximum D130 “ISO”2160
Density at 15 °C
(59 °F)
(3)
Kg / M
3
801 minimum and 876
maximum No equivalent test “ISO 3675 ”“ISO 12185”
Distillation °C 10% at 282 °C
(539.6 °F) maximum
90% at 360 °C (680 °F)
maximum D86 “ISO”3405
Flash Point °C legal limit D93 “ISO”2719
Thermal Stability
-
Minimum of 80%
reflectance after aging
for 180 minutes at
150 °C (302 °F) D6468 No equivalent test
Pour Point °C 6 °C (42.8 °F) minimum
below ambient
temperature D97 “ISO”3016
Sulfur
(1)(4)
%mass 1% maximum D5453/D26222 “ISO 20846 ”“ISO 20884”
Kinematic Viscosity (5) “MM”
2
“/S (cSt)” The viscosity of the
fuel that is delivered to
the fuel injection pump.
“1.4 minimum/4.5
maximum” D445 “ISO”3405
Water and sediment % weight 0.1% maximum D1796 “ISO”3734
Water % weight 0.1% maximum D6304 No equivalent test
Sediment % weight 0.05% maximum
D473
“ISO”3735
Gums and Resins
(6)
mg/100mL 10 mg per 100 mL
maximum D381 “ISO”6246
(continued)