Fiorenzato F4 EVO, Installation, Use And Maintenance Manual

Page: 85 / 480

Fiorenzato | Series F4 EVO_00 Ed. 06/2022 41 / 44
F4 EVO
EN
8 REQUESTING SPARE PARTS
If it is necessary to replace worn parts of the coffee grinder-doser (e.g. grinders), the
end user (e.g. barista / restaurateur, etc.) must necessarily contact their local distributor
as a direct intermediary with Fiorenzato M.C. S.r.l. and communicate the model of the
coffee grinder-doser in their possession for the identification, request and procurement
of original spare parts. Only authorised area distributors will then be granted the
opportunity to register on our website to order the necessary spare part.
In order to request spare parts, local distributors must:
•
Access the website www.fiorenzato.com, enter the section dedicated to spare parts
and select the coffee grinder model indicated by the end user.
• Access the reserved area by entering your details in the appropriate form (upon the
first access, registration is required by entering your identification data).
• Select the necessary spare parts using the exploded tables of the product present
in the portal.
• Follow the wizard to complete the order and send it to Fiorenzato M.C. S.r.l. .
• The local distributor will be contacted by the personnel of Fiorenzato M.C. S.r.l. who
will oversee the request.
ATTENTION! Remember that the interventions to replace the grinders and
in general all the internal parts of the grinder-doser must be carried out by
specialist technical personnel.
ATTENTION! Fiorenzato M.C. S.r.l. is not responsible for any injury to persons
and/or damage to the appliance caused by the replacement of components
with non-original spare parts and performed by unqualified personnel.