background image

 

MACHINE FEATURES AND TECHNICAL DATA 

TERMINATOR-1000

 

Rev. 000 

20/12/04 

7/35

 

 

 
 

2.   MACHINE FEATURES AND TECHNICAL DATA 

 
 

2.1.    IDENTIFYNG THE MACHINE 

 

A silver label is sticked on the protection case of the steering column and clearly shows the data referring to 
the “CE” marking. 
 
           

 

      
 
 
 

 

 

 

 
 

2.2.    DESCRIPTION AND COMPONENTS 

 

The scrubber machine – TERMINATOR-1000 - has been designed for the cleaning of all flat surfaces by 
means of washing and suction of the washing water. 
The electric traction system is supplied by a series of batteries which supply energy to the brushes motors, to 
the squeegee motor, to the suction motor and to the sweeping system (OPTIONAL). 
The machine is equipped with three front or central rotating brushes which wash the surface by means of 
water and detergent. Whilst the machine is running forward, the back brush (squeegee) picks the water up 
that is directly sucked into the recovery tank. 
The accelerator pedal starts both the washing brushes and the suction motor which stop automatically after a 
few seconds when you leave the pedal (the solenoid valve switches on only at the brushes ignition 
OPTIONAL). When the washing brushes standstill, they are non more in contact with the ground. In this way 
the bristles will not be damaged while the brushes are not working. The vacuum motor turns on when the 
suction squeegee goes down and it stops automatically at the rise of the squeegee. 
The sweeping unit (OPTIONAL) assembled in the centre with the front washing plate must pick up the dirty 
inside the waste container. The sweeping unit has to be used during the first washing phase so that to pick 
up the dirty which can obstruct the squeegee. 
Thanks to the dashboard the operator can control all the machine functions and a series of LEDs shows to  
the operator the battery status or the errors detected by the electronic card.  
The operator can control all the main machine functions and in particular: 
 

 

¾

  Turn on the washing brushes lowing the plate (SOLENOID VALVE OPTIONAL); 

¾

  Regulate the quantity of water; 

¾

  Start the suction motor lowing the squeegee; 

¾

  Start the lift or the sink of the plate; 

¾

  Start the lift or the sink of the squeegee; 

¾

  Lift up and lower the brush of the sweeping unit (OPTIONAL) 

¾

  Choose the forward or back gear; 

 

Ing. O.Fiorentini S.r.l. 

MADE 

 
 

 

50030 Piancaldoli (FI) 

IN ITALY 

  

  

Mod 

TERM1000R 

S.N. 

102 

V 36 

Hz 

 

 

Kg 1020 

155 

kW 

5,70 

2008 

PICTURE N° 2.1

Summary of Contents for TERMINATOR-1000




































Reviews: