5
TRANSPORT AND STOCKING
PACKED MACHINE HANDLING
The machine is delivered in a special package, which is shown in picture nr. 2.
The gravity centre is indicated on the package with a black arrow. The pallet must be
forked in the middle of the side with the black arrow in order to avoid overturning.
The case should be handled with extreme caution.
It is forbidden to lay cases on each other.
Picture 2
UNPACKING THE MACHINE
1.
Cut the plastic bands. Pay attention to the spring back.
2.
Remove the clips that fix the carton to the pallet.
3.
If the case is made of plywood, remove the clips from the each side and the base.
4.
Remove the plastic bands that hold the machine.
5.
Place the machine on the floor.
UNPACKED MACHINE HANDLING
1.
Check the machine and install the batteries if they are not installed.
2.
If the machine has to be handled for a short transport, disconnect the battery
cables. It is recommended to pack the machine again in its original case if it has
to be handled for a longer transport.
