10
SAFETY, MAINTENANCE AND INSPECTION
GENERAL SAFETY RULES
Before using the machine ,instruct all operators to read carefully the charter ”SAFETY
STANDARDS “WARNING.
•
The manufacturer can make any changes to the machine, for constructive or commercial
reasons, without being obliged to change the instruction manual at the right time according to
these modifications.
•
The person responsible for the machine must adhere to CEE rules and to the local standards as
well, regarding the working environment for operator’s safety and health purposes.
•
Before starting the machine ,always perform the preliminarily checks. The safety standards
which involve any dangers, mentioned in the manual text, can be recognized by the symbol:
CAUTION.
•
Beyond the standard listed hereunder, the person responsible for the machine must comply with
the rules provided by the law in force regarding personnel’s safety and health in the working
stations. Furthermore, the person responsible for the machine must instruct the operators on
what follows:
o
Safety and accident prevention standards
o
Specific standards regarding the machines
o
Location on the machine of emergency pushbuttons or similar mechanism, for a prompt
operation. The fixed or movable protections(carters)should always remain in their
position, correctly fixed with perfect integrity during all procedures regarding the
normal operation. If, for any reason ,the carters are removed, their efficiency should be
restored before restarting the machine.
o
Use the machine only under technically unexceptionable conditions and in compliance
with its destination, by observing the safety and prevention standards according to the
prescriptions contained in the instruction and maintenance handbook.
o
Remove (or let remove) immediately any failures which could compromise the safety.
o
The machine is designated to be used as a scrubber ;any other different use doesn’t not
comply with its destination. the manufacturer/supplier takes no responsibility for any
consequent damage.
•
DANGER
It is absolutely forbidden to suck inflammable and or toxic liquids and powders
•
DANGER
It is dangerous and absolutely forbidden to touch the lower part of the machine with the hands
when some parts are moving. Should it be absolutely necessary, remove the main key from the
control dashboard.
CAUTION
Keep in mind the following standards; failure to adhere to these rules can endanger the life of the
operator or of other people. Always keep a sufficient distance from the sidewalk edges and from
large differences in height of the floor where the machine can fall; never adopt a work technique
that can compromise the stability of the machine. Never pass through slopes in transversal
direction; when going through a downhill road, always adjust the speed to the environment
conditions. Do not turn the machine at excessive speeds, particularly if the floor is not flat.
CAUTION: DANGER
Never operate the machine when stopped for special operations (setting up, maintenance, etc.).
Before starting the work, check for any possible visible defects on the safety devices, and the
