TECHNICAL DATA
I32P/13139 GODFREYS
Rev. 00 del 05/07/04
7/36
2. MACHINES FEATURES AND TECHNICAL DATA
2.1. IDENTIFYING THE MACHINE
A silver label is sticked on the protection case of the steering column and clearly shows the data referring to
the “CE” marking.
The label has never to be removed and should always be kept readable. In case of
damage t is necessary to ask for a duplicate. The autoscrubber machine cannot be sold
without the label.
2.2. DESCRIPTION AND COMPONENTS
The autoscrubber machine – I32NEW 13139 - has been designed for the cleaning of all flat surfaces by
means of washing and suction of the washing water.
The electric traction system is supplied by a series of batteries which supply energy to the brushes motors, to
the squeegee motor and to the suction motor.
The machine is equipped with two rotating brushes which wash the surface by means of water and
detergent. Whilst the machine is running forward, the back brush (squeegee) picks the water up that is
directly sucked into the recovery tank.
The accelerator pedal starts both the washing brushes and the suction motor which stop automatically after a
few seconds when you leave the pedal. When the washing brushes standstill, they are non more in contact
with the ground. In this way the bristles will not be damaged while the brushes are not working.
Thanks to the dashboard the operator can control all the machine functions and a series of LEDs shows to
the operator the battery status or the errors detected by the electronic card.
The operator can control all the main machine functions and in particular:
??
Start the washing brushes (ELECTRIC JACK);
??
Start the suction motor;
??
Start or stop the machine.
The machine frame is made of zinc-plated or stainless steel in order to avoid oxidation which could
compromise the machine reliability.
The main parts of the machine are:
??
Zinc-plated steel or stainless steel frame;
PICTURE Nr. 2.1
