SAFETY
I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04
19/36
4.5.1 BATTERIES INSTALLATION
??
Lift the recovery tank up in order to reach the batteries room (picture 4.3.);
??
Install the batteries in their room (picture 4.4.) and make sure that the cases of the batteries are not
broken;
??
Never fill distilled water after having recharged the batteries.
??
Clean the surfaces for the connections;
??
The operator can easily lift the batteries up by means of handles;
??
Connect the cables.
4.5.2 BATTERY CHARGER INSTALLATION
Batteries must be recharged in a place equipped with a proper suction system of gases spread during this
operation. Otherwise, batteries must be charged in a ventilated and dry place far from heat sources and
corrosive substances.
Protect the electric network with a delayed switch or with a fuse whose capacity is higher than the battery
charger maximum input.
Control the battery outlet polarity.
Picture 4.4
