background image

 

10                                                                                 

 

E

gases produced by the battery. 

Always follow the instructions for the 
battery charger. 

 

 

The machine is equipped with four 6V gel batteries 
connected in series. 

The batteries must be completely removed from 
the machine for replacement. Gel batteries are 
sealed and therefore cannot be refilled with 
electrolyte. 

Raise the vacuum head. 

Remove the waste container. 

Remove the main bonnet from the machine. 

Disconnect the batteries from the electrical system 
by removing the cables from the battery terminals.  

Remove them from the support shelf. 

Place the batteries on a level surface. To charge 
the battery, use the battery charger on the 
machine after carefully reading the instruction 
booklet. 

It should be noted that the four batteries are 
connected in series and that the system has a 
rated voltage of 24 Volts. 

7 Disposal 

 

 

All the packaging is recyclable. The 
packaging must not be disposed of as 
domestic waste but delivered to the 
proper collection centres. 

Decommissioned machines contain 
valuable recyclable materials and should 
be delivered to the proper collection 
centres. Batteries, oil, and similar 
substances must not be discarded in the 
environment. You are therefore requested 
to dispose of decommissioned machines 
through segregated collection systems.  

 

8 Warranty 

The warranty is valid for 12 months 

The manufacturer cannot be held liable in any way 
for damages resulting from unauthorised 
modifications made to the machine, the use of 
unsuitable accessories or usage of the machine 
other than that which is intended. 

9 Accessories and Spare Parts 

Only use accessories and spare parts approved by 
the manufacturer. Original accessories and spare 
parts ensure that the machine can be used safely 
and without malfunctions. 

 

 
 

ING. O. FIORENTINI S.p.A. 

 
 
 

Via Piancaldoli 1896 Firenzuola 50033 

Frazione Piancaldoli (FI) 

 Italy 

 

Telephone (+39) 055 81 73 610 

Fax (+39) 055 81 71 44 

E-mail: [email protected]  

Website: www.ingfiorentini.it 

www.fiorentinispa.com 

 

 

Summary of Contents for ASPIRIK













Reviews: