manualshive.com logo in svg

FIOR & GENTZ NEURO FLEX MAX, Tutorial

Introducing the FIOR & GENTZ NEURO FLEX MAX, the ultimate neurological rehabilitation device. Enhance your therapy sessions with this state-of-the-art equipment. For thorough understanding and seamless usage, easily access the user manual tutorial, available for free download from our website. Achieve exceptional results with this innovative product.

Share
Download
background image

09-12-18

30/55

Joint Assembly NEURO FLEX MAX

09-12-18

30/55

Joint Assembly NEURO FLEX MAX

 Alternative Function 3

Check if the system joint moves without lateral play. Hold the tibial shell and

try to move the femoral shell in varus-valgus direction. If the system joint

runs with lateral play, mount the next thicker sliding washers, repeat all

steps from step 8 onwards and check again.

Note: With a bilateral orthosis, only check one system joint at a time.

Step 16/16

Secure both screws with LOCTITE 243 medium strength and the torque

corresponding to the system width.

Step 1/26

Summary of Contents for NEURO FLEX MAX
























































Reviews:

No comments

Related manuals for NEURO FLEX MAX

Vela Tango 600 Mounting Instructions preview
Tango 600
Brand: Vela Pages: 2
KMINA PRO User Manual preview
PRO
Brand: KMINA Pages: 6
Gemino 30 Walker User Manual preview
30 Walker
Brand: Gemino Pages: 60
Vermeiren 250 Instruction Manual preview
250
Brand: Vermeiren Pages: 24
Direct Healthcare Group SystemRoMedic 43804002 Instructions For Use Manual preview
SystemRoMedic 43804002
Brand: Direct Healthcare Group Pages: 32
Direct Healthcare Group 45500003 User Manual preview
45500003
Brand: Direct Healthcare Group Pages: 42
Guldmann 281001 Manual preview
281001
Brand: Guldmann Pages: 36
Handy Tech Sophie Pro Quick Reference preview
Sophie Pro
Brand: Handy Tech Pages: 5
Schuchmann ted. Instructions For Use Manual preview
ted.
Brand: Schuchmann Pages: 28
Schuchmann BASTI Instructions For Use Manual preview
BASTI
Brand: Schuchmann Pages: 16
Schuchmann freddy Instructions For Use Manual preview
freddy
Brand: Schuchmann Pages: 26
PEPE P40007 User Manual preview
P40007
Brand: PEPE Pages: 2
PEPE P10012 Quick Start Manual preview
P10012
Brand: PEPE Pages: 2
PEPE P10003 Quick Start Manual preview
P10003
Brand: PEPE Pages: 2
Krabat Jockey Lite User Manual preview
Jockey Lite
Brand: Krabat Pages: 16
Krabat Sheriff S1 User Manual preview
Sheriff S1
Brand: Krabat Pages: 19
Krabat Runner S2 User Manual And Assembly Manual preview
Runner S2
Brand: Krabat Pages: 21
Golden Technologies 8-02 BPWARB Owner'S Manual preview
8-02 BPWARB
Brand: Golden Technologies Pages: 12

Brands by name

Popular brands

Load more brands