manualshive.com logo in svg

FIOR & GENTZ NEURO FLEX MAX, Tutorial

Introducing the FIOR & GENTZ NEURO FLEX MAX, the ultimate neurological rehabilitation device. Enhance your therapy sessions with this state-of-the-art equipment. For thorough understanding and seamless usage, easily access the user manual tutorial, available for free download from our website. Achieve exceptional results with this innovative product.

Share
Download
background image

09-12-18

26/55

Joint Assembly NEURO FLEX MAX

09-12-18

26/55

Joint Assembly NEURO FLEX MAX

If you have demounted the extension stop before, place it correctly on the

joint's upper part now.

Step 6/16

Apply spray adhesive to one side of the first sliding washer and adhere it to

the cover plate. Grease the other side of the sliding washer slightly with the

delivered orthosis joint grease.

Step 7/16

Grease the friction surfaces of both bearing nuts with the delivered orthosis

joint grease.

Step 8/16

Summary of Contents for NEURO FLEX MAX
























































Reviews:

No comments

Related manuals for NEURO FLEX MAX

Able 2 Saturn Instruction Manual preview
Saturn
Brand: Able 2 Pages: 11
Stel Orthopedie FREE LOCK PG User Manual preview
FREE LOCK PG
Brand: Stel Orthopedie Pages: 4
Medema MC Concept 1121 Quick Manual preview
MC Concept 1121
Brand: Medema Pages: 24
WY'EAST MEDICAL SUMMIT500 Instructions For Use Manual preview
SUMMIT500
Brand: WY'EAST MEDICAL Pages: 26
Zippie ZM-310 Owner'S Manual preview
ZM-310
Brand: Zippie Pages: 32
RoMedic SystemRoMedic LiftSeat Manual preview
SystemRoMedic LiftSeat
Brand: RoMedic Pages: 4
ABLE2 Atlantis PR46043 Quick Start Manual preview
Atlantis PR46043
Brand: ABLE2 Pages: 5
identités 823086 Instruction Manual preview
823086
Brand: identités Pages: 8
Peak Ellipse 8149-FX User Manual preview
Ellipse 8149-FX
Brand: Peak Pages: 4
Peak JY-YWS03 Quick Start Manual preview
JY-YWS03
Brand: Peak Pages: 10
Innovaciones M.S. ANDADOR BASIC PLUS Owner'S Manual preview
ANDADOR BASIC PLUS
Brand: Innovaciones M.S. Pages: 68
Innovative Mobility Products SmartScooter User Instruction Manual preview
SmartScooter
Brand: Innovative Mobility Products Pages: 30
AREBOS 4260199756577 Original User Manual preview
4260199756577
Brand: AREBOS Pages: 9

Brands by name

Popular brands

Load more brands