9
ENG
Program controller
The program controller has a finishing-time setting that can be used to specify a day and time for the program
to finish. The switch-on time is calculated automatically so that the heating process is stopped at the required
time and the sintered item can be removed.
Operating parameters and heating programs are stored in a non-volatile memory and are retained even if the
power supply fails.
The set target temperature is maintained within an accuracy of ± 1 °C. A temperature sensor integrated into
the heating chamber measures the temperature of the chamber close to the product.
A thermocouple fail-safe prevents the sintering oven from overheating if the temperature sensor becomes
defective.
4.2 Intended use
The FINOSINT KOMPAKT High-Temperature Sinter Furnace is a high-temperature oven for commercial
application in dental laboratories and may be used only for sintering sinterable ceramics using original spare
parts.
At a total output >1kW, no limit values for the harmonics apply.
4.3 Potential misuse
•
Operation by untrained and insufficiently qualified personnel.
•
Use of products that have not been approved by the manufacturer.
•
Use of replacement parts that have not been approved by the manufacturer.
•
Any use not in accordance with the declaration of conformity.
•
Technical modifications to and conversions of the unit that have not been approved by the manufacturer.
NOTICE
The protection of persons can no longer be ensured and no liability can be assu-
med for damage that is caused by misuse, incorrect operation, incorrect connec-
tions or improper maintenance/repair work carried out by untrained personnel. All
warranty services are also excluded in such cases.
The use of spare and wearing parts that have not been procured from the manu-
facturer will render the approval and guarantee of the sintering oven null and
void.