21
ENG
9.8 Preparing the sintering aid
9.8.1 Recommended filling of the standard sintering dish
1
Fill the standard sintering dish with a layer of sintering beads.
2
Place the parts to be sintered into the standard sintering dish.
Make sure that the bottom of the dish is covered by a layer of sintering beads and that the sin-
tering beads can move around freely.
The information provided by different material manufacturers may vary and must be observed.
9.8.2 Sintering with the sintering disc
1
Check the sintering disc (item A) for roughness.
2
If necessary, smooth the sintering disc (item A) with a suitable diamond
grinding stone (item B).
NOTICE
Pressing the Arrow buttons again will deactivate the integrated timer again. This
allows the selected program to be immediately started manually.