6. After finishing work
6.1 Switching the vacuum cleaner off
and storage
1. Switch off the cleaner and pull the mains plug out
of the socket.
2. Wind up the power cord onto the handle (A).
Begin winding up the cord at the cleaner end
and not the plug end to prevent the power cord
from tangling up.
3. Empty the dirt tank and clean the vacuum
cleaner.
4. After picking up liquids: Store the upper section
of the vacuum cleaner separately so that the
filter element can dry.
5. Store the cleaner in a dry room where it is
protected from unauthorized use.
7. Maintenance
7.1 Maintenance plan
7.2.1 Emptying dirt tank
» After finishing
work
7.2.2 Replacing filter bag
» When required
7.2.3 Replacing filter element » When required
7.2 Maintenance work
7.2.1 Emptying the dirt tank
After emptying the tank: clean the rim of the tank and
the seals in the intermediate ring and the upper
section of cleaner before refitting them.
If the seal or groove is dirty or damaged, the suction
performance will be reduced.
Before reinserting the suction hose: clean the inlet
fitting and hose collar.
1. Switch off the vacuum cleaner and pull the
mains plug out of the socket.
2. Open the retaining clamps (A) and remove
the upper section of the vacuum cleaner.
3. Tip out the collected dirt.
4. Dispose of the dirt in accordance with
legal regulations.
9
ENU
