4.1.2 Electrical connection
The operating voltage shown on the rating plate
must corres pond to the voltage of the mains power
supply.
1. Ensure that the cleaner is switched off.
2. Insert the power cord into a properly installed
and fused socket with earthing contact.
4.2 Switching on the vacuum cleaner
4.2.1 Switch „auto-0-I“
4.2.2 Suction power control
Switch position
Function
0
Off
auto
Auto On/Off
I
On/manual mode
Switch position
Function
The suction power
control switch allows
precise adaptation of
the suction power for
different cleaning tasks.
4.2.3 Auto-On/Off-Operation –
„auto“ switch position
The vacuum cleaner is switched on and off by the
power tool connected. Dirt is picked up from the
source of dust immediately.
To comply with regulations, only approved dust
producing tools should be connected.
The maximum power consumption of the connected
electrical appliance is stated in section „Technical
data“.
Before switching the switch to position „auto“,
ensure that the tool connected to the appliance
socket is switched off.
1. Switch off the vacuum cleaner.
2. Switch off the power tool.
3. Connect the power tool and the vacuum cleaner
with a suction hose.
7
ENU
