FINO DUSTEX VARIO L User Information Download Page 4

Transport

1. Before transporting the dirt tank, 

close all the locks.

2. Do not tilt the cleaner if there is liquid 

in the dirt tank.

3. Do use a crane hook to lift the cleaner.

Storage

1. Store the appliance in a dry place, 

protected from frost.

Electrical connection

1. It is recommended that the vacuum cleaner

should be connected via a residual current 
circuit breaker.

2. Arrange the electrical parts (sockets, plugs 

and couplings) and lay down the extension lead
so that the protection class is maintained.

3. Connectors and couplings of power supply cords

and extension leads must be watertight.

Extension lead

1. As an extension lead, only use the version 

specified by the manufacturer or one of 
a higher quality.

2. When using an extension lead, check the 

minimum cross-sections of the cable:

Maintenance, cleaning and repair

Electrical tests must be performed in accordance
with the provisions of safety regulations (BGV A3)
and to DIN VDE 0701 Part 1 and Part 3. In accordance
with DIN VDE 0702 these tests must be performed at
regular intervals and after repairs or modifications.

Cable length

Cross section

< 16 A

< 25 A

up to 20 m

1,5 mm

2

2,5 mm

2

20 to 50 m

2,5 mm

2

4,0 mm

2

During maintenance and cleaning, handle the 
vacuum cleaner in such a manner that there is no
danger for maintenance staff or other persons.

In the maintenance area
• use filtered compulsory ventilation
• wear protective clothing
• clean the maintenance are so that no harmful

substances get into the surroundings.

Risks
Electrical components

DANGER! Electric shock due to 
faulty mains connecting lead.

Touching a faulty mains connecting lead can result in
serious or even fatal injuries.

1. Do not damage the mains power lead 

(e.g. by driving over it, pulling or crushing it).

2. Regularly check whether the power cord is

damaged or shows signs of ageing.

3. Have the faulty mains connecting lead replaced

by your FINO service representative or a qualified
electrician prior to using the appliance again.

DANGER! 
The upper section of the vacuum
cleaner contains live components.

Contact with live components leads to serious or
even fatal injuries.
1. Never spray water on to the upper section of the

vacuum cleaner.

CAUTION! Damage due to unsuitable
mains voltage.

The appliance can be damaged as a result of being
connected to an unsuitable mains voltage.
1. Ensure that the voltage shown on the rating plate

corresponds to the voltage of the local mains
power supply.

4

Summary of Contents for DUSTEX VARIO L















Reviews: