Finn T120-II HydroSeeder, Operator Instructions And Parts Manual

Page: 97 / 139

T120 MN0805
91
WHEN ORDERING PARTS, BE SURE TO STATE
SERIAL NUMBER OF MACHINE
WHEEL AND HUB ASSEMBLY
(STRAIGHT PULL AND GOOSENECK TRAILER)
Ref.
No. Part
Number Description No. Req’d
1 005808 Axle, 7200# (Includes Hub, Drum & Brakes) 2
2 005823-01 Brake Assembly, LH 1 per*
005824-01 Brake Assembly, RH 1 per*
3 005822-01 Grease Seal 1 per*
4 005821-01 Inner Bearing Cone 1 per*
5 005820-01 Inner Bearing Race 1 per*
6 005825-01 Lug Nut 8 per*
7 005817-01 Outer Bearing Race 1 per*
8 005816-01 Outer Bearing Cone 1 per*
9 005815-01 Spindle Washer 1 per*
10 005814-01 Spindle Cotter Pin 1 per*
11 005813-01 Spindle Nut 1 per*
12 005812-01 Grease Cap 1 per*
005811-01 Rubber Plug Insert 1 per*
13 005818-01 Press - In Stud, 9/16 in. - 18 8 per*
14

05819-01 Hub and Drum Assembly 1 per*
(Includes hub/Drum, Bearings, Races, Studs and Grease Seal)
15 005827 Wheel Assembly ST235/85R16 on 16x6 Rim 2 per axle
*NOTE: All of these required quanitities are quantities required per Hub and Drum Assembly, NOT per axle.