Finn T120-II HydroSeeder, Operator Instructions And Parts Manual

Page: 92 / 139

T120 MN0805
86
WHEN ORDERING PARTS, BE SURE TO STATE
SERIAL NUMBER OF MACHINE
OPERATOR'S PLATFORM
(SKID MODEL)
Ref. No. Part Number Description No. Req’d
20 002258 Clamp Handle Assembly 1
-- Clamp Handle Hardware

1/2 - 13 UNC x 1.25 Hex Bolt 1
 
1/2 in. Helical Spring Lock Washer 2
 
1/2 in. Plain Washer 3

1/2 in. Hex Nut 2
21 005161 Rubber Strap with "S" Hooks 1
22 005700 Nylon Lanyard 3
23 031245 Snapper Pin 1
24 005528-02 Boom Hold Down Weldment 1
25 005532-03 Spacer 1
26 012052 Gate Spring 1
27 023684 Loop Clamp 2
28 -- Loop Clamp Hardware
 
1/4 - 20 UNC x 0.75 Hex Bolt 2

1/4 in. Plain Washer 2
 
1/4 in. Helical Spring Lock Washer 2

1/4 in. Hex Nut 2
29 -- Gate Hardware

3/8 - 16 UNC x 3.0 Hex Bolt 1
 
3/8 in. Helical Spring Lock Washer 1
 
3/8 in. Plain Washer 2

3/8 in. Hex Nut 1
30 -- Operator's Platform Hardware

3/8 - 16 UNC x 1.25 Hex Bolt 2

3/8 in. Plain Washer 22
 
3/8 in. Helical Spring Lock Washers 22

3/8 in. Hex Nut 22

3/8 - 16 UNC - 3.0 Hex Bolt 1

3/8 - 16 UNC - 1.0 Square Head Bolt 11

3/8 - 16 UNC Jam Nut 11

3/8 - 16 UNC - 2.5 Hex Bolt 4
KITS AND MARKERS

Standard Hardware Item - Available at your local hardware store.