Finn HydroSeeder T170 MB, Operator Instructions And Parts Manual

Page: 88 / 106

T170 MB0521 Rev. B
WHEN ORDERING PARTS, BE SURE TO STATE
SERIAL NUMBER OF MACHINE
82
OUTSIDE OF
TANK WALL
BEARING ASSEMBLY
NOTE: BEARING ASSEMBLY (012529)
NOTE: TO TIGHTEN, TURN NUT - NOT THE BOLT.
TORQUE TO 25 lb-ft (34 N•m). DO NOT OVER TORQUE.
AGITATOR SHAFT ASSEMBLY
NOTE: AGITATOR SHAFT ASSEMBLY (012505)
DRIVE END
2 in. AGITATOR
SHAFT THROUGH
BACK SIDE
APPLY (1) SOLID,
CONTINUOUS BEAD OF
SILICONE ADHESIVE AROUND
OUTER EDGE ON THE INSIDE
FACE OF THE CLAMPING
RING BEFORE INSTALLATION.
3
4
5
6
7
8
9
1
2
11
12
13
14
11
12
15
14
16
14
14
17
10
11
11
15
10
IDLE END
2