English
- 13 -
Multipartiton support is available. Maximum 2
•
different partitions are supported. If disk have more
then 2 partition, crash may occur. First partition of
usb disk is used for PVR ready features. And also
it must be formatted as primary partition to be used
for PVR ready features.
Multipartition HDDs are supported; up to two
•
partitions.
Some stream packets may not be recorded because
•
of signal problems,in some circumstances the video
may freeze during playback.
Record, Play, Pause, Display (for PlayListDialog) keys
•
could not be used when teletext is ON. If a recording
starts from timer when teletext is ON, teletext is
automatically turned off. Also teletext usage is disabled
when there is ongoing recording or playback.
Radio record is not supported.
•
The TV can record programmes up to ten hours.
•
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press
“
SOURCE
” button on your remote control consecutively
for directly changing sources.
You can operate your TV using both the remote control
and onset buttons.
Operation with the Buttons on the TV
Volume Setting
Press “
•
” button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
Press “
•
P/CH +
” button to select the next programme or
“
P/CH -
” button to select the previous programme.
Viewing Main Menu
Press the “
•
”/“
” button at the same time to
view main menu. In the Main menu select sub-menu
using “AV” button and set the sub-menu using “
” or “
” buttons. To learn the usage of the menus,
refer to the menu system sections.
AV Mode
Press the “
•
AV
” button in the control panel on the TV
to switch between AV modes.
Operation with the Remote Control
The remote control of your TV is designed to control all
•
the functions of the model you selected. The functions
will be described in accordance with the menu system
of your TV.
Volume Setting
Press “
•
V+
” button to increase the volume. Press “
V-”
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press “
•
P -
” button to select the previous programme.
Press “
•
P +
” button to select the next programme.
Programme Selection (Direct Access)
Press numeric buttons on the remote control to select
•
programmes between 0 and 9. The TV will switch to
the selected programme. To select programmes in
channels 10 and above press the numeric buttons
of the channel you require consecutively. If you
press only one button, that respective channel will
be displayed.
01_[GB]_[VESTEL_UK]_MB61_5110UK_PVR_IDTV_100Hz_55990LED_PLATINIUM4_10077371_50210679.indd 13
01_[GB]_[VESTEL_UK]_MB61_5110UK_PVR_IDTV_100Hz_55990LED_PLATINIUM4_10077371_50210679.indd 13
22.12.2011 10:31:24
22.12.2011 10:31:24
