Finlux 22FLD850VRU Owner'S Manual Download Page 31

Page: 31 / 46

English

- 30 -

Coloured Buttons

You can use coloured buttons in accordance with
the displayed functions. When

TOP text

system is

available, sections in a teletext page will become
colour-coded and can be selected by pressing the
coloured buttons. Press a coloured button that
corresponds to with your needs. The coloured writings
will appear, showing you which coloured buttons to
use when

FASTEXT

transmission is present.

Teletext Subtitle

If you press “

SUBTITLE

” button, teletext subtitle

information will be displayed on the bottom right part
of the screen (if available). You can set the desired
option by highlighting it using “ ” or “ ” button and
then by pressing OK button.

Tips

Image Persistence

Please note that ghosting may occur while displaying
a persistent image. LCD TVs’ image persistence may
disappear after a short time. Try turning off the TV for
a while. To avoid this, do not leave the screen in still
picture for extended periods.

No Power

If your TV system has no power, please check the
main power cable and connection to the mains
socket outlet.

Recording Unavailable

To record a programme, you should

rst connect

a USB disk to your TV

while the TV is switched

off

You should then switch on the TV to enable

recording feature. Otherwise, recording feature will
not be available.

If you cannot perform recording, try

switching off the TV and then re-inserting the USB
device while the TV is switched off.

USB Is too Slow

If “USB is too slow” message is displayed on the
screen while starting a recording, try restarting
the recording. If you still get the same error, it is
possible that your USB disk does not meet the speed
requirements. Try connecting another USB disk.

Poor Picture

Have you selected the correct TV system? Is your TV
set or house aerial located too close to a non-earthed
audio equipment or neon lights, etc.?

Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune the
channels. The picture quality may degrade when two
peripherals are connected to the TV at the same time.
In such a case, disconnect one of the peripherals.

No Picture

Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial
cable damaged? Are suitable plugs used to connect
the aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving a
transmission. Have you selected the correct button on
the remote control? Try once more. Also make sure
the correct input source has been selected.

Sound

You can not hear any sound. Did you perhaps interrupt
the sound, pressing the “

” button?

Sound is coming from only one of the speakers. Is the
balance set to one extreme? See Sound Menu .

Remote Control

Your TV no longer responds to the remote control.
Perhaps the batteries are exhausted. If so you can still
use the local buttons at the bottom of the TV.

Input Sources

If you cannot select an input source, it is possible that
no device is connected.
Check the AV cables and connections if you have tried
to connect a device.

MB45_[GB]_(01-TV)_1900UK_PVR_IDTV_NICKEL9_22850W_10065795_50157824.indd 30

23.10.2009 10:20:37