1. Introduction
FC-IR101 measures the body temperature through receiving the infrared energy radiation
from the object of objects. It is with forehead temperature mode, and ear temperature
mode. The measurement result directly shows on the LED screen.
The device is widely used for home healthcare, medical institutes and many other
occasions.
The product is mainly composed with infrared temperature sensors, signal receiving
processor, buttons, buzzer, LED display, battery, etc.
1.1 Indications for Use
The infrared thermometer is intended for the measurement and monitoring of human body
temperature by doctor or customers in the hospital or home.
1.2 Safety Information
Warnings
：
■
Read the instruction manual before using this device.
■
The measurement results cannot replace the physician diagnosis.
■
The thermometer is placed in the position not touched by children.
■
Never point the device at ones’ eyes when measuring.
■
Do not try to change the product factory settings.
■
Use the thermometer in a stable temperature environment. If the environment
temperature changes too much, for example from outdoor to indoor, please put the
thermometer and wait for about half an hour minutes before measuring.
■
After measuring extremely high or low temperature, don’t measure body
temperatures immediately, you should measure 10 minutes later.
■
Prohibit the thermometer into any liquid.
■
Don’t use in high or low temperature environment for a long time.
■
No collision, falling and sharp objects mix, it is forbidden to disassemble the
thermometer.
■
Don’t use in strong electromagnetic interference environment.
■
Avoid using the thermometer when drying the hair, drenching water, sweating, and
putting on skin cosmetics.
■
Don’t measure the temperature after doing sports, washing and 30 minutes before
dinner.
■
Portable RF communications equipment (including peripherals such as antenna
cables and external antennas) should be used no closer than 30 cm (12 inches) to
any part of the thermometer, including cables specified by the manufacturer.
Otherwise, degradation of the performance of this equipment could result.
■
No special maintenance is needed to the use process. Please contact the vendor or
manufacturer for fault.
2. Principle
Any object in which temperature is higher than absolute zero degree will transmit some
infrared radiation energy according to its own temperature. The radiation energy and its
