http:// en.fineart-light.com
- 15 -
Material: High temperature resistant glass and 0.5mm high temperature
resistant aluminum alloy.
On wheel 1, the gobo retention spring works with gobos up to 3 mm in
thickness. Thicker gobos can be glued to the holder.
Aluminum gobo with low cost and perfect effect, the useful life will depend
on the gobo pattern and the projection cycle.
Gobos are interchangeable between FINE400
Spot and FINE700 Spot.
Orientation
Coated Glass Gobos
Coating
side(more
effective side)
towards lamp
non-coating side back
against the lamp
Textured Glass Gobos
Textured side towards
lamp
smooth side back
against the lamp
Metal
gobos
More effective side
towards lamp
black side back against
the lamp
Image/text
gobos
True image towards
lamp
reversed image towards
lamp
Replacement of rotating gobo wheel
1
、
rasp the holder by the teeth and pull the holder lightly towards the front
lens to release the holder and remove it from the wheel.
2
、
Unhook the end of the gobo spring furthest from the gobo and pull out
the spring. Drop the gobo out of the holder.
3
、
Insert the new gobo in the holder, insert the spring with the narrow end
against the gobo, and push the end of the spring in under the lip of the
holder.
4
、
Work the rim of the gobo holder under both clips and snap the gobo
holder back into position on the gobo wheel. If necessary, a small
screwdriver or similar tool may be used to pry the clips away from the
wheel.
http:// en.fineart-light.com
- 16 -
Picture11
Replace static gobos
1
、
Turn the gobo wheel to the desired position. Press the gobo from the
lamp side to release. Remove the gobo.
2
、
To insert a gobo, orient the gobo and place the edges under the retention
spring.
Color Wheel
FINE700 Spot has 1 color wheel with 8 changeable dichroic color
filters, as shown in picture 12.
Picture 12 Color wheel (view from prism side)
Replace color filters
Notice! Wear cotton gloves while handling color filters and coating side
towards to the lamp.
1
、
Turn the color wheel to access the desired filter position for easy
disassembly.
2
、
Press the filter forwards slightly to release it and then grasp it by the
edges and remove. If your fingers are too large, protect the glass with a
piece of paper that has been folded several times and grasp the filter
with needle nose pliers.
