Fimer FMR-PVS-10-TL-SX Product Manual Download Page 26

Page: 26 / 80

3.10 Functionality and components description

3.10.1 Highlights

• Compact inverter suitable for vertical installation

• Fuse-free design

• Installation on new systems and retrofit applications

• Maximum string voltage 1100Vdc

• Commissioning through the “Installer for Solar Inverters” mobile app and Web UI

• Integrated Export Limitation function

• Single string current monitoring

• PID recovery function (optional)

3.10.2 Improved commissioning and maintenance

FIMER Installer for Solar Inverters (App for mobile)

Improved multi inverter installation with FIMER Installer for Solar Inverters app compatible with both Android and iOS devices.

Integrated Web User Interface

Wi-Fi access to the integrated Web User Interface allows to access to single inverter’s parameter and setting via the most common

Internet browser.

Remote firmware update function

The firmware of the inverter can be updated both locally (via Web User Interface or Installer for solar inverters mobile app) and remotely

(Via Aurora Vision cloud products).

3.10.3 Aurora Vision

Integrated logging capability allows remote monitoring of the plant without the needs of any additional external loggers.

Aurora Vision is a cloud based platform enabling remote monitoring and asset management of FIMER devices in range of solar power

application.

Aurora Vision consist of two different products, designed to meet different market needs, an APIs Service (RESTful architecture) to

enabled third party data integration and a KIOSK view to show publicly solar plant benefits and performances:

•

Plant Portfolio Manager

. An advanced professional web-portal that allows stakeholders (such as installers/operators/managers) to

monitor and control fleets of photovoltaic systems installed for final customers.

•

Energy Viewer

. A smart and easy-to-use mobile app for monitoring the main power generation and self-performances indicators, for

owners of residential and commercial PV plants, in order to keep energy use and savings in check.

•

APIs Service

. Harness the power of data from FIMER’s photovoltaic systems to design solutions and provide opportunities.

•

KIOSK View

. A public and customizable web page based on HTML5 (self-updating and embeddable in external frames) to show the

benefits and performances of a solar power plant.

NOTE –

Please contact the

FIMER technical support

for getting your own Aurora Vision

account in order to access Plant Portfolio

Manager (mainly for plant administrators). Download the Energy Viewer App (

) or visit

and click on “Sign-Up“ in order to get your Aurora Vision account and Self-Register your plant (mainly for site

owners).

3.10.4 Remote ON/OFF

This command can be used to remote ON/OFF via an external command by means the Digital input and RS485 connector

(12)

The functionality must be enabled in the integrated web user interface.

When the functionality is active the switching-on of the inverter, besides being dictated by the presence of normal parameters which allow

the inverter to be connected to the grid, also depends on the external control for switching on/off.

Summary of Contents for FMR-PVS-10-TL-SX

















































































Search results

Summary of Contents for FMR-PVS-10-TL-SX

Reviews:

Brands by name

Popular brands

Fimer FMR-PVS-10-TL-SX, Product Manual

Search results

Summary of Contents for FMR-PVS-10-TL-SX

Reviews:

Brands by name

Popular brands