Fimap GL Pro Use And Maintenance Manual Download

Page: 27 / 32

PROBLEM

POSSIBLE CAUSE

SOLUTION

THE SQUEEGEE

DOES NOT DRY

PERFECTLY

The vacuum unit is obstructed.

Check that the squeegee is free from obstructions (see

paragraph “CLEANING THE SQUEEGEE BODY” on

page 21).
Check that the vacuum tube is free from obstructions

(see paragraph “CLEANING THE VACUUM TUBE” on

page 23).

Check that the filters in the recovery tank are free

from obstructions (see paragraph “CLEANING THE

RECOVERY TANK FILTERS” on page 22).

The cap on the recovery tank drainage tube is not

properly positioned.

Check that the cap on the recovery tank drainage tube is

positioned properly.

The recovery tank lid is not positioned correctly.

Check that the recovery tank lid is properly positioned on

the machine.

EXCESSIVE FOAM

PRODUCTION

The detergent being used is not suitable.

Check that a low foam detergent has been used. If

necessary, add a small quantity of anti-foam liquid to the

recovery tank.

The floor is not very dirty.

Dilute the detergent more.

THE MACHINE

DOES NOT

VACUUM

CORRECTLY

The recovery tank is full.

Empty the recovery tank (see paragraph “DRAINING

THE RECOVERY TANK” on page 21).

The vacuum device is obstructed

Read the section THE SQUEEGEE DOES NOT DRY

PERFECTLY.

DISPOSAL

Dispose of the machine in accordance with the waste disposal regulations in force in the country in which the

machine is being used.

Summary of Contents for GL Pro

































Search results

Summary of Contents for GL Pro

Reviews:

Related manuals for GL Pro

Brands by name

Popular brands

Fimap GL Pro, Use And Maintenance Manual

Search results

Summary of Contents for GL Pro

Reviews:

Related manuals for GL Pro

Brands by name

Popular brands