21
WEEKLY MAINTENANCE
5.
Loosen the screws on the squeegee that blocks (with nuts) the rubber-pressing blade
6.
Remove the rubber-pressing blade
7.
Replace the rubber
8.
Reassemble everything, carrying out the above-mentioned operations in the reverse order.
ATTENTION: users are advised to always wear protective gloves, to avoid the risk of
serious injury to hands.
3. CLEANING THE SQUEEGEE TUBE
Periodically, or whenever suction seems to be unsatisfactory, verify that the squeegee tube is not obstructed. To clean
it, proceed as follows:
1.
remove the tube from the sleeve on the squeegee
2.
remove the other end from the recovery tank
3.
wash the inside of the tube with a water jet introduced from the side where it is connected to the tank
4.
Re-assemble the tube
ATTENTION: users are advised to always wear protective gloves, to avoid the risk of
serious injury to hands.
ATTENTION: this operation must be carried out with the machine switched off and the
battery connector disconnected
4. CLEANING THE SOLUTION TANK AND FILTER
1.
Loosen the solution tank cap
2.
Remove the filter and clean it.
3.
Reassemble the filter and cap.
ATTENTION: users are advised to always wear protective gloves, to avoid the risk of
serious injury to hands.
ATTENTION: this operation must be carried out with the machine switched off and the
battery connector disconnected
