Page 24
DAILY MAINTENANCE
3.
Remove the collection tank vent cap (1) by rotating it anticlockwise.
4.
Remove the collection tank drainage tube (2) (on the back of the machine) from its restraint.
5.
Put the tube on the drainage surface and unscrew the cap.
6.
Repeat the operations in reverse order to reassemble all the parts.
ATTENTION: the place designated for this purpose must comply with the current
environmental protection regulations.
To remove the paper filter/collection bag, proceed as follows:
1.
Take the machine to the designated recovery tank drainage place.
2.
Make sure the machine is in a safe condition (read “
MACHINE SAFETY
”).
ATTENTION: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
3.
Free the vacuum head from the collection tank by releasing the hooks (5) on the side of the tank. Rotate
the levers as shown by the arrow in the picture on the right.
4.
Use the handle (2) on the vacuum head unit to remove it from the collection tank.
5.
Rest the head carefully on the ground.
