Page 17
WORK
8.
Insert the plug (3) of the power cable (4) in the mains socket (5).
9.
Switch on the machine by bringing the main switch (6) to the work position “I”.
10.
Carry out the cleaning work.
ATTENTION: if the vacuuming intensity diminishes while you are working, read
“
IMPROVING THE VACUUMING CAPACITY
”.
15.
WET VACUUM CLEANER
To start working, proceed as follows:
1.
Make all the checks indicated in “
PREPARING THE MACHINE
”.
2.
Free the vacuum head from the collection tank by releasing the hooks (1) on the side of the tank. Rotate
the levers as shown by the arrow in the picture on the right.
3.
Use the handle (2) on the vacuum head unit to remove it from the collection tank.
4.
Rest the head carefully on the ground.
5.
Make sure the float unit is inserted in the collection tank. If this is not the case, position it correctly.
ATTENTION: there must be no solid waste residue inside the collection tank.
