Page 18
WORK
6.
Use the handle (2) on the vacuum head unit to position it above the collection tank.Make sure the
machine's power supply cable is in the rear part of the tank.
7.
Fix the vacuum head to the collection tank by coupling the hooks (1) on the side of the tank. Rotate the
levers as shown by the arrow in the picture on the right.
8.
Insert the plug (3) of the power cable (4) in the mains socket (5).
9.
Switch on the machine by bringing the main switch (6) to the work position “I”.
10.
Carry out the cleaning work.
ATTENTION: if the vacuuming intensity diminishes while you are working, read
“
IMPROVING THE VACUUMING CAPACITY
”.
The machine is fitted with a mechanical device (float) under the vacuum lid. When the collection tank is full,
this device shuts off the air to the vacuum motor to protect it; you will recognise this condition by the deeper
noise made by the motor. When you hear this sound, you must empty the collection tank (read “
EMPTYING
THE COLLECTION TANK
”).
