Fimap FS50 B-BT, Use And Maintenance Manual

Page: 8 / 24

8
MACHINE PREPARATION
1. HANDLING THE PACKAGED MACHINE
The machine is contained within specific packaging.
It is not possible to place more than two packages on top of each other.
The overall dimensions of the package are:
FS 50
A 153 cm
B 76 cm
C 119 cm
Weight of packed FS50 B-BT machine: W = 95 Kg
Weight of packed FS50 H-HT machine: W = 103.5 Kg
A
C
B
2. HOW TO UNPACK THE MACHINE
1.
Remove the straps
2.
Remove the staples at the base of the package
3.
Remove the cardboard
4.
Use a chute to get the machine down from the pallet, pushing it backwards
5.
Keep the pallet for any future transport needs.
ATTENTION: if the product is delivered in cardboard containers, handle the
packed product with suitable lifting means that comply with the legal
requirements.
4
3. BATTERY TYPE (FS50 B-BT VERSION)
To power the machine it is necessary to use:

liquidelectrolyte lead traction batteries
OTHER TYPES MUST NOT BE USED.
The batteries must meet the requisites laid out in standards CEI EN 60254-1:2005-12 (CEI 21-5) + CEI
EN 60254-2:2008-06 (CEI 21-7).
Each battery consists of DIN type cells connected in series that supply 12V 120Ah(C20) – 100Ah(C5)
voltage to the clamps
4. BATTERY MAINTENANCE AND DISPOSAL (FS50 B-BT VERSION)
For maintenance and recharging, comply with the instructions provided by the battery manufacturer.
Particular attention must be paid when choosing the battery charger, if not supplied, since there are
different kinds according to the type and capacity of the battery.
Proceed as follows when the battery is dead:
1. Raise the covering hood
2. Disconnect the battery connector
3. Remove the battery by using suitable devices, lifting it with the provided handles.
4.
EXHAUSTED BATTERIES ARE CLASSIFIED AS DANGEROUS WASTE AND MUST BE CONSIGNED
TO THE AUTHORISED BODIES FOR CORRECT DISPOSAL.
ATTENTION: you are advised to always wear protective gloves, to avoid the
risk of serious injury to your hands
ATTENTION: You are advised to only lift and move the batteries with lifting
and transportation means suitable for the specific weight and size