(Fig. 15)
(Fig. 16)
6
ATTACH THE FILTER:
You will need: filter (A)
1. Insert the filter (A) into the filter head (B).
2. Push filter up, then turn one quarter
of a turn to the right until it stops.
(Fig. 15)
3. When properly attached, there will
be NO gap between the filter head (B)
and the filter (A).
FILTER
REPLACEMENT
INSTRUCTIONS:
CAUTION
To reduce the risk of property damage due to
water leakage, replace filter every six months or sooner.
NOTE: You do NOT need to shut off your water supply
when changing your filter. The system will automatically
shut off the water supply while the filter is being changed.
REPLACING FILTER
1. Turn filter to the left until it releases from the filter head.
2. Gently pull filter down to remove.
3. Insert new filter into filter head, turn one quarter of a
turn to the right until it stops.
4. Open dedicated faucet to flush 2 gallons (approx. 4 minutes)
through the system before use. Water may start cloudy,
but will turn clear as the trapped air is released.
5. Activate filter change indicator according to instructions on page 8.
Replacement filters can be purchased at original point of sale.
Available filters include 4US-MAXS-F01 and 4US-MAXL-F01.
TURN WATER ON:
1. Turn the water back on at the
cold water shut-off valve. (Fig. 16)
2. Open dedicated faucet to flush 2 gallons
(approx. 4 minutes.) through the system
before use. Water may appear cloudy, but
will turn clear as the trapped air is released.
3. Check for leaks. If any dripping or leaking
occurs, turn cold water supply off, open both
faucets, tighten fittings and ensure that tubing is
pushed completely into fittings.
4. Activate filter change indicator according to
instructions on page 8.
YOUR SYSTEM IS NOW READY FOR USE.
tubing connections
should be reversed
tubing connections
should be reversed
