Filtration Group MFS-05, Translation Of The Original Instructions

Page: 18 / 25

Page 18
Translation of the original instructions MFS-05
Δp, Filtration Group GmbH, 16.01.18, Mat. No. 70303409, Version 03
19 Appendix: Default settings
19.1 Main parameters of the MFS-
05 Δp in “interval time control” mode
Parameter Comments Factory setting Operation
No. of valves Refer to section 6 for information about settings N
Interval potentiometer Controller characteristic, section 10.9 60
Pulse time Pressure cleaning
Rotating wing
0.1 s
1.5 s
Post-cleaning cycles 0
Alarm threshold 18 mbar
Terminal assignment See circuit diagram Jumper 18-19
Jumper settings Schw./Reg. jumper Up
T/G Cycle jumper Up
19.2 Other operating modes
19.2.1 “Switching threshold” mode
Parameter Comments Factory setting Operation
Jumper settings Schw./Reg. jumper Down
T/G Cycle jumper Up
High threshold 14 mbar
Cleaning cycles 1
Terminal assignment See circuit diagram Jumper 18-19
Jumper settings Schw./Reg. jumper Down
T/G Cycle jumper Up
19.2.2 “Time control” mode
Parameter Comments Factory setting Operation
Terminal assignment Terminals 16-17 and 18-19 jumpered
Interval time 600 divided by the number of valves n xx
Jumper settings Schw./Reg. jumper Down
T/G Cycle jumper Up