Page 8
AirTamer®
If you want to use the included
6.
GERM-ODOR-
VIRUS PROTECTION FILTER,
attach it to the
AIR FILTER
as follows:
A
. Stick the enclosed hook and loop strips
(4 included) to the
BACK
corners of the
AIR FILTER FRAME
.
B
. Push the
GERM-ODOR-VIRUS PROTECTION
FILTER
against the hook and loop strips.
NOTE:
make sure
GERM-ODOR-VIRUS
PROTECTION FILTER IS ON ThE BACK OF
ThE MAIN FILTER AND PLACED CLOSEST
TO ThE FANS
.
Insert the
7.
AIR FILTER
by placing the bottom
of the
AIR FILTER
inside your AirTamer and
pushing it past the large front rubber tab.
Then push the top of the
AIR FILTER
past the
large front rubber tab at the top of the unit.
NOTE:
make sure ThaT The air floW
arroWs oN The filTer face
ToWards The froNT of The uNiT.
Replace the
8.
AIR EXIT GRILL
.
Place the unit on a level floor, keeping it
9.
at least 4” (10.2 cm) away from any wall,
furniture or appliances. Position the unit so
that the clean air will flow to your desired area
(clean air flows from the front of the unit).
Ensure that the
AIR INTAKE GRILL
and
AIR EXIT GRILL
are not blocked.
8
7
A
B
6
HW_A710_UserMan_ENG_05.indd 8
5/14/09 9:04:17 AM