Page 13
makes life better!
Replacing the Filter
Please follow these steps to replace your AirTamer®
AIR FILTER
.
Turn the AirTamer® off by pressing the
1.
POWER BUTTON
and unplugging the unit
from the electrical outlet.
Remove the
2.
AIR EXIT GRILL
by pushing down
on the
AIR EXIT GRILL TABS
(2a) and pulling
the
AIR EXIT GRILL
(2b) away from the unit.
Remove the
3.
AIR FILTER
by firmly gripping
the sides of the
AIR FILTER
and pulling the
AIR FILTER
out of the unit.
Mark the suggested month of
4.
AIR FILTER
replacement on the new
AIR FILTER
by
checking off the appropriate month (e.g. If it
is suggested that the
AIR FILTER
be replaced
in twelve (12) months and you install the
AIR
FILTER
on January 1st, put a check in the box
beside the letter representing the month to
replace – in this case January, for the next
January.).
Insert the new
5.
AIR FILTER
by placing the
bottom of the
AIR FILTER
inside your
AirTamer® and pushing it past the large front
rubber tab. Then push the top of the
AIR
FILTER
past the large front rubber tab at the
top of the unit.
NOTE:
make sure ThaT The air floW
arroWs face ToWards The froNT
of The uNiT.
Replace the
6.
AIR EXIT GRILL
.
Press and hold down the
7.
ChANGE FILTER
LIGhT BUTTON
for three (3) seconds to reset
the
ChANGE FILTER
memory.
2a
2b
3
5
7
6
HW_A710_UserMan_ENG_05.indd 13
5/14/09 9:04:18 AM
