OV-II Maintenance, Troubleshooting and Service Manual
1-6
Industrial Dynamics Company, Ltd. ©
Form 42600 (10/03)
~ BLANK PAGE INTENDED ~
Spindle Assembly
Check the spindle assembly by removing the starwheel. The
Valve Plate should be smooth and free from defects. If it is
scratched or worn excessively, it must be replaced. The Valve
Plate Assembly must move freely in the vertical direction or it
will impart excessive drag to the starwheel. The Valve Plate
must slide easily up and down on the four Alignment Pins in the
Hub.
DO NOT USE AN OIL-BASED LUBRICANT IN THIS
AREA, IT MAY CLOG THE VALVE PLATE.
Check the flexible hoses connected to the vertical Port tubes to
ensure that they are not binding against starwheel drive
components, etc. If this assembly is binding and cannot be freed,
then it must be disassembled.
Starwheel Registration Plate
Check that the "Tang" protrusion is not damaged. Replace if
worn or damaged with kit P/N 42928-1 or 42928-2.
Takeaway System
Check the Takeaway System for loose parts and excessive wear.
Tighten all bolts securely.
Conveyor Wear Strips
Check strips (located under the production chain) for excessive
wear or damage. Replace wear strips if excessively worn or
damaged.
ITEM
MONTHLY MAINTENANCE
