Filtec Omnivision 1000 Series, Upgrade Installation Manual

Page: 14 / 70

6 Omnivision Upgrade Installation Manual
Document 45277-0805
• A/C unit on top of the Omnivision including the supporting
plate
• The keypad from the operator side of the machine. The side
to be used will have to be decided by the customer .
• Air Gauge panel
• Circuit Breaker Panel and Power Switch
• Upper Cabinet Harness
except the AC power to the utility
outlet .
• Harnessing from the columns
• Disconnect all connectors in the lower cabinet. Remove the
lower cabinet harness.
• Inspection Head Harness. Do not cut any water hoses if they
are present.
Electronic Cards
Once the machine is powered down all of the electronic compo-
nents must be secured and prepared to be returned to IDC.
Wrap each entire electronic chassis and the LCM assembly in the
anti-static wrap that was used for the new components and place
in the upgrade crate(do not remove individual cards). Secure
each chassis/assembly in the crate with the pink foam provided.
Use the provided RMA to return all of the electronics and unused
upgrade components.
After the upgrade is completed it is the responsibility of the
technician to ensure the crate is immediately shipped back to
IDC/Torrance.
Mechanical Differences
OV-900 &1200 Series1000/2000 Upper Cabinet
The upgrade will require the removal of the E-chain and all
mechanical assemblies that hold the drawer. The power cable for
the utility outlet and the monitor power cable should remain in
the upper cabinet.