FiField Bonfire, Owner'S Manual

Page: 21 / 29

17
Battery Indicator
The five battery bars
represent the capacity of the
battery. When the battery is low
the battery frame on screen will
flash to notify that it needs to be
recharged immediately.
Error Code Information
If an error code appears, take
note of what code is displayed.
Contact a service center to get
your bicycle repaired. An error
code will be displayed in the
bottom right corner in place of the
normal “WATT” display.
For more information on the LCD
screen, refer to our website to
download the extended version of
the manual.
Clearing the Trip Time and
Distance
1. Press and hold the “+” and
“-“ buttons at the same
time
2. A menu titles “tc-n” will
appear
3. Press the “+” button to
make the option “tc-y”
4. This means “trip clear –
yes”
5. Press the “M” button to
select and clear
6. Now press and hold the “M”
button to back out of the
following menu
Pedal assistance
Your pedal assist will start
once you start to pedal and stop
once you stop peddling. You are
able to adjust the amount of
assistance on the LCD screen by
adjusting the + / - button. If you do
not want any assist, you may set it
to 0 and no assist will be given. If
the handbrakes are applied, the
pedal assist will cut automatically.
You do not need to turn the power
off when going downhill.
Throttle
The throttle is located on the
left side of your handlebars. It is a
one speed throttle which does not
engage unless there is movement
in the rear wheel. To engage the
throttle, turn the throttle towards
you while seated on the bike.
There is an automatic SHUT OFF of
the throttle on the brake levers.
Every time the brake lever is
pressed, the power from the
motor is disconnected.
Gears
There are 8 internal gears on
your bicycle. The gears are located